Tubing and Connectors

Respironics mask swivel used to connect some Respironics mask to the breathing tube.

Tubing adapter for the HDM Z1 cpap machine.

Mask adaptor for the Philips PR12 and HT12 tubing.

This tubing is lighter and more flexible alternative than standard gray tubing. It is designed to improves system performance by reducing pull or torque on the interface that can disrupt seal.

This tubing is lighter and is the smaller 15mm diameter alternative to the standard 22mm performance tubing. It is designed to work with the System One units that have a 15mm tubing option.

Designed specifically for the AirSense 10 & AirCurve 10 CPAP/VPAP devices, this lightweight, 3-meter, small diameter tubing has a built-in heating element that greatly reduces "rainout" or condensation on the inside of the tube, and also has a built-in port for supplemental oxygen..

This is the non-heated 15mm diameter tubing that comes packaged with the Philips DreamStation CPAP and BiPAP machines.

Premium smooth bore 4ft CPAP/BiPAP Hose by Sunset Healthcare Solutions

Premium smooth bore CPAP/BiPAP Hose by Respironics

This tubing is lighter, more flexible and smaller in diameter than standard gray tubing. It helps to prevent mask leaks by reducing pull or torque on the interface that can disrupt seal.

This lightweight, small diameter tubing has a built-in heating element that greatly reduces "rainout" or condensation on the inside of the tube.

Designed specifically for the S9 CPAP and VPAP devices, the 6ft, 22mm tubing has a built-in heating element that greatly reduces "rainout" or condensation on the inside of the tube.

Medium weight gray 6ft CPAP tubing by Sunset Healthcare Solutions

Flexible 10ft Lightweight Grey CPAP tubing

Fisher & Paykel 6-foot CPAP machine tubing with built-in heating for use with Fisher & Paykel ICON-series ThermoSmart CPAP machines.

Grey 6-foot fleece hose cover insulates the breathing tube and reduces condensation and noise.

Grey 6-foot insulated fabric hose cover with handy zipper, designed to fit the SlimLine tubing;, made by ResMed. Insulates the breathing tube and reduces condensation and noise.

BreatheWear Thermal Tubing Cover - 10ft

Inline humidification solution unit for use with the Z1 CPAP Machines. These are designed to recycle moisture from the patient's exhaled air.

HDM QTube Inline muffler for use with the Z1 CPAP Machines. These are designed to reduce perceived noise transmitted from the cpap device through the cpap tubing. This item can be used with any cpap device

This is the non-heated 12mm diameter tubing for the Philips Respironics DreamStation and DreamStation Go CPAP and BiPAP machines.

Hose Coupler with 22 mm I.D. and 22 mm O.D. Swivels 360 degrees.

Hose Coupler - fits standard 22 mm O.D. CPAP tubing cuff. Solid, non-swivel.

This is the Respironics brand inline disposable bacteria filter. The filter attaches between your Cough Assist or CPAP machine and your tubing to provide post-machine bacteria filtering.