Home>CPAP Interfaces>Nasal Pillow Interfaces > ResMed AirFit P30i Nasal Pillows System

ResMed AirFit P30i Nasal Pillows System

See Details

If you are purchasing a new CPAP, Auto CPAP or BiLevel (BiPAP) machine, humidifier or an oxygen concentrator, then federal law requires that we receive a copy of a prescription written by your doctor. A sleep study report does not qualify as a prescription. Also, the purchase of complete CPAP masks does require a prescription. (* Note that the component parts that make up the mask DO NOT require a prescription! *)

The prescription must state that it is for CPAP therapy and at what pressure your machine should be set. If you are purchasing a standard CPAP machine (one that operates at a constant pressure), then the prescription must show one pressure setting, which is generally a number between 4 and 20 and measured in cm of H2O. If you are purchasing an Auto CPAP machine, then your prescription must state two different pressures: A low (minimum) pressure setting and a high (maximum) pressure setting. If you are purchasing a BiLevel machine, then your prescription must state two pressure settings: An inspiratory (IPAP) setting and an expiratory (EPAP) setting. If you are purchasing an Oxygen Concentrator, the prescription should have the flow rate stated in Liters per minute.

Prescriptions can be faxed to us at 888-469-2555, or we can accept a scanned copy of your prescription by emailing it to us at [email protected].

Please note that orders for machines, concentrators, or complete masks will NOT be shipped until we receive a copy of your prescription!

ResMed AirFit P30i Nasal Pillows System

Part ID:

P30i

In Stock

| Questions about this item? Be the first to ask here.

Your Price:$79.00

16 Review(s)

How will you send your Prescription?

I will send my prescription via email

I will send my prescription via fax

A copy of my prescription is on file

Send me the parts kit (no Rx Req)

Size

63850, Standard Starter Pack (S,M,L Pillows / Standard Frame)

63851, Small Starter Pack (S,M, Pillows / Small Frame)

Quantity

Manufacturers Note:

The ResMed AirFit P30i Nasal Pillows System is one of ResMed's new AirFit line of interfaces for treatment of sleep apnea. Like the AirFit N30i, this interface utilizes a hose attachment swivel that is positioned at the crown of the head to move the hose out of the way of active sleepers. It utilizes the same frame that channels the air down along two passages that run alongside the user's temples, which allows for a clear line of vision with minimal interference with the activities of the user. The AirFit P30i comes packaged with three sizes of nasal pillows: small, medium, and large with a standard frame for the Standard Starter Pack (63850), and small and medium pillows and a small frame for the small starter pack (63851).

Whats a parts kit?

The parts kit consists of the AirFit P30i headgear and the AirFit P30i frame with the nasal pillows included. If you choose this option you do not need a prescription but you will need to assemble the system yourself by attaching the cloth strap to the back of the frame.

Product Features:

Quiet. The AirFit P30 employs ResMeds QuietAir diffused venting designed to minimize noise and disruption - up to 80% quieter than other nasal pillows designs.
Unobtrusive. Designed to be barely noticeable, the QuietAir woven mesh-vent gently directs air away from patients and their bed partners.
Easy to fit. The QuickFit auto-adjusting headgear can be fitted in 30 seconds or less and offers premium stability and adjustability.
Stable. The innovative headgear is designed to gently stabilize the interface while pulling the pillows firmly into place.

What's in the Box:

ResMed AirFit P30i Nasal Pillows interface with headgear
The Standard Starter Pack #63850 includes three sizes of pillows: (S, M, L) and standard size frame
The Small Starter Pack #63851 includes two sizes of pillows: (S, M, ) and Small size frame
Printed user instructions

comfortable for side/active sleeper

I changed from Resmed's AirFit P10 to their newer AirFit P30i Nasal Pillows System. What attracted me was the position of its intake on top of my head and on a swivel, since I found the tubing dangling from my nose to be obtrusive and prone to pulling the nasal pillows away from my face when I rolled over. The P30i is comfortable and stays in place better thanks to its strapping on top as well as behind my head.

Did you find this helpful? 9 of 10 Found Helpful

Reviewed by: Bill from Dallas. on 7/31/2019

Not for everybody

This mask was terrible. Great idea of having hose on top of head but difficult to adjust this mask and actually get air into your nose. Other websites offer a 30 day trial on all masks but not this website. I would not order a mask from this web site unless you are certain it will work for you!

Did you find this helpful? 7 of 8 Found Helpful

Reviewed by: (Verified Buyer) John Mclaughlin from Atlanta. on 7/15/2019

best mask i have ever had

I absolutely love this mask. I no longer have seal issues. It is great for my tossing and turning. And the best thing for me is that it directs the air into my nostrils and doesn't push on my nose. I have recommended it to my mother and my aunt.

Did you find this helpful? 2 of 3 Found Helpful

Reviewed by: Liane from utah. on 9/18/2019

Mr.

I wanted to love this mask. The fit was just ok, no matter how much I messed with it. The most objectionable thing was the noise. Because the air is ducted around your head, it sounds louder than my Aloha mask. Maybe I'll try it again but for now it's just a backup

Did you find this helpful? 2 of 4 Found Helpful

Reviewed by: C Hill from Westminster. on 8/16/2019

Great seal but not for me

Not everyone has the same shaped head, the side tubes pressed too hard on my cheek bones. I tried it for one night anyway, and found a semi comfortable strap position. However the nose plugs badly irritated my nostrils and eventually woke me up in pain and extremely congested. I bought the N30i pillow to use with the same headgear and found it more comfortable but not a good seal like the P30i. I’m sure this is great for users with a smaller head and less sensitive nose.

Did you find this helpful? 2 of 3 Found Helpful

Reviewed by: Scott from West Palm Beach. on 7/10/2019

Excellent choice

Love this headgear! Super comfortable, quiet and no more hose wraps around my neck when I toss or turn. Comfortable breathing, better nights of sleep.

Did you find this helpful? 1 of 1 Found Helpful

Reviewed by: Jim from Corvallis. on 2/11/2020

Todd

True Resmed high quality product, original packaging and shipping was quick. Very happy with this product, works as advertised!

Did you find this helpful? 1 of 1 Found Helpful

Reviewed by: Todd from Everett. on 2/4/2020

Best mask in my 6 years of cpap.

Did you find this helpful? 1 of 3 Found Helpful

Reviewed by: Curt from Lowell. on 8/8/2019

User

I've been using a Respironics Dreamwear system that I liked the design of. The location of the air tube to the top of your head is much more comfortable for me. The ResMed system is very similar, but in my opinion much quieter and the nasal cushion more comfortable. I would recommend this system highly.

Did you find this helpful? 1 of 2 Found Helpful

Reviewed by: Tony from Irvine. on 7/23/2019

Well made unit

When I first saw this item I thought this would be better than what I was using, I always have a problem with the angle of the pillow blocks with any headset. After using for a few weeks I found that the angle of the pillow blocks isn't quite right for my nose, they should be a little more upright for me otherwise they leak. I tried the L & M sized pillow blocks w the M size being slightly better. Other than that, I like the unit, there was a little creep of the headband at times but other headsets do the same. I would say to anyone else, it might work for you, worth a try.

Did you find this helpful? 1 of 3 Found Helpful

Reviewed by: Carl from Leesburg. on 7/4/2019

I love this mask!! I am an active sleeper that struggles with being awakened by leaks. I have been very loyal to my P10 nasal pillow for over 5 years although I have purchased well over 10 masks attempting to find a better solution. I had by-passed the P30i because it looked is so similar to Dreamwear which did not work for me. Dreamwear is VERY noisy with a huge vent right by the nose piece. The P30i has a much improved design over Dreamwear. THIS MASK IS VIRTUALLY SILENT....THIS IS A GREAT MASK!!!

Did you find this helpful?

Reviewed by: Denny from Florida . on 8/12/2020

Ms.

I really like this new system. I'd been using the old ResMed "Swift LT for Her" mask, with the hose attached below the nasal pillow. It had worn out, so I thought I'd try this new model. I like having the hose attach to the top, and I don't have any problem whether I sleep on my side or back. I'd recommend it to anyone looking for a (new) mask.

Did you find this helpful?

Reviewed by: Kris G from MISSOURI VALLEY. on 6/13/2020

self

It is the first time I tried Pillows. Very comfortable system. Percent of air leakage is reduced over my nasal mask. Also seems like there are fewer parts to wear out & replace. Just be sure to set your Cpap machine to "pillows" if it's in the menu.

Did you find this helpful?

Reviewed by: Jackie from Daytona Beach Florida. on 6/9/2020

California

Wonderful mask. a game changer. Couldn’t expect anything better than this. I highly recommend it .

Did you find this helpful? 0 of 1 Found Helpful

Reviewed by: Italo Regoli from Cathedral city . on 12/25/2019